VANAGON archives -- March 2017, week 5

VANAGON archives – March 2017, week 5

Re: Hatchback struts (52 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Engine died after a mysterious "BOOM!" (89 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
'84 Westy in NJ...dirt cheap $2 grand (17 lines)
From: JordanVw@AOL.COM
Re: Hatchback struts (64 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Hatchback struts (75 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Hatchback struts (22 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Hatchback struts (87 lines)
From: KI4TLF <ki4tlf@GMAIL.COM>
Fwd: VanAlert comes through in Raleigh/Durham (49 lines)
From: Steven Johnson <sjohnso2000@GMAIL.COM>
Re: Test 4 (38 lines)
From: Harold Teer <teer.vanagon@GMAIL.COM>
Re: Fwd: VanAlert comes through in Raleigh/Durham (63 lines)
From: Abel Longoria <houstonphotog@GMAIL.COM>
Re: Fwd: VanAlert comes through in Raleigh/Durham (79 lines)
From: Sudhir Desai <sudhir.desai@GMAIL.COM>
Re: Front top shock bushing needed PN# 251-411-130 (25 lines)
From: T Collins <tonycollin@GMAIL.COM>
Re: Front top shock bushing needed PN# 251-411-130 (29 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Front top shock bushing needed PN# 251-411-130 (26 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Front top shock bushing needed PN# 251-411-130 (28 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Any listers in Mass?? (13 lines)
From: JordanVw@AOL.COM
Re: Hatchback struts (79 lines)
From: Alistair Bell <albell@SHAW.CA>
2002 EV Auto Transmission (20 lines)
From: ANTONY MARSH <apetermarsh@ME.COM>
Re: 2002 EV Auto Transmission (45 lines)
From: kenneth wilford (Van-Again) <kenwilfy@COMCAST.NET>
Re: Hatchback struts (91 lines)
From: KI4TLF <ki4tlf@GMAIL.COM>
Windows, Electric, Failure (39 lines)
From: Neil2 <vidublu@GMAIL.COM>
Re: Hatchback struts (129 lines)
From: Eric Caron <ecaron1@COMCAST.NET>
Re: Hatchback struts (69 lines)
From: Neil2 <vidublu@GMAIL.COM>
Re: Windows, Electric, Failure (82 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Updating Vanagon.com with new articles (25 lines)
From: kenneth wilford (Van-Again) <kenwilfy@COMCAST.NET>
Re: Windows, Electric, Failure (95 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Makeshift Clutch Alignment Tool (17 lines)
From: David <fjazzbass@GMAIL.COM>
Re: Hatchback struts (106 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Hatchback struts (103 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: Hatchback struts (121 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Makeshift Clutch Alignment Tool (28 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: Hatchback struts (126 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: Updating Vanagon.com with new articles (36 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: Makeshift Clutch Alignment Tool (30 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Makeshift Clutch Alignment Tool (40 lines)
From: den jolliffe <sondancer77@YAHOO.COM>
Re: Makeshift Clutch Alignment Tool (38 lines)
From: Dave Bohannan <fjazzbass@GMAIL.COM>
Re: Makeshift Clutch Alignment Tool (37 lines)
From: Dave Bohannan <fjazzbass@GMAIL.COM>
Re: Makeshift Clutch Alignment Tool (35 lines)
From: Stacy Schneider <vwcrewman@GMAIL.COM>
Re: Hatchback struts (154 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Hatchback struts (96 lines)
From: James Vogl <jamesvogl@GMAIL.COM>
Re: Hatchback struts (168 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: Hatchback struts (139 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Hatchback struts (177 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Hatchback struts (171 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Re: Hatchback struts (177 lines)
From: Johann Koenig <johann.koenig@GMAIL.COM>
propane copper tubing 3/8" type K , rigid or soft (33 lines)
From: Christophe Guilbert <cguilbert@PICASSO.UCSF.EDU>
(NVC)Need delivery help Santa Cruz to Los Angeles. (17 lines)
From: James Kim <jkim.phd@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (56 lines)
From: Neil N <musomuso@GMAIL.COM>
Re: Makeshift Clutch Alignment Tool (43 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (71 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: propane copper tubing 3/8" type K , rigid or soft (63 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Re: Makeshift Clutch Alignment Tool (23 lines)
From: Rob <vwrobb@GMAIL.COM>
Looking for two West interior items (16 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (68 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: Where's the other end of my broken ground strap? (45 lines)
From: George Gaudette <gcgaudette@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (63 lines)
From: Patrick Spragge <spraggepat@GMAIL.COM>
Re: Hatchback struts (20 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Hatchback struts (181 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: propane copper tubing 3/8" type K , rigid or soft (86 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Hatchback struts (149 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Hatchback struts (187 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Hatchback struts (192 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: advice on new propane tank (387 lines)
From: Mark McCulley <markmcculley@GMAIL.COM>
Re: Hatchback struts (202 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: Hatchback struts (223 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: advice on new propane tank (454 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (88 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Throttle Body Switch Cam (12 lines)
From: Jim O'Connor <jimmy.oco@GMAIL.COM>
Re: advice on new propane tank (84 lines)
From: Frank Condelli <RAlanen@AOL.COM>
Re: Engine died after a mysterious "BOOM!" (101 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Silly Question, maybe? (25 lines)
From: Laura Mangan <laurakmangan@GMAIL.COM>
Re: Silly Question, maybe? (45 lines)
From: Eric Caron <ecaron1@COMCAST.NET>
Re: Silly Question, maybe? (56 lines)
From: kenneth wilford (Van-Again) <kenwilfy@COMCAST.NET>
Re: advice on new propane tank (75 lines)
From: gary hradek <hradek@YAHOO.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (46 lines)
From: Frank Condelli <RAlanen@AOL.COM>
Re: Throttle Body Switch Cam (22 lines)
From: Dan N <dn92610@GMAIL.COM>
Re: Throttle Body Switch Cam (33 lines)
From: Neil N <musomuso@GMAIL.COM>
Re: Silly Question, maybe? (63 lines)
From: Laura Mangan <laurakmangan@GMAIL.COM>
testing (11 lines)
From: JordanVw@AOL.COM
Re: Silly Question, maybe? (18 lines)
From: JordanVw@AOL.COM
Re: advice on new propane tank (85 lines)
From: Jeff Palmer <w.jeff.palmer@ICLOUD.COM>
Re: Silly Question, maybe? (23 lines)
From: Laura Mangan <laurakmangan@GMAIL.COM>
Re: Silly Question, maybe? (84 lines)
From: kenneth wilford (Van-Again) <kenwilfy@COMCAST.NET>
Re: Silly Question, maybe? (21 lines)
From: JordanVw@AOL.COM
Re: Where's the other end of my broken ground strap? (29 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Hatchback struts (206 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Re: Silly Question, maybe? (83 lines)
From: Eric Caron <ecaron1@COMCAST.NET>
purging propane tank (20 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: Silly Question, maybe? (22 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Silly Question, maybe? (24 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Silly Question, maybe? (43 lines)
From: Laura Mangan <laurakmangan@GMAIL.COM>
Re: Silly Question, maybe? (59 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: Silly Question, maybe? (74 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Silly Question, maybe? (81 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (19 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: propane copper tubing 3/8" type K , rigid or soft (27 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: advice on new propane tank (109 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: advice on new propane tank (129 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (31 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
=?UTF-8?Q?WTB_or_trade_Cibi=C3=A9_36_fog_light_covers?= (12 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Fwd: Front cot (60 lines)
From: David Bjorkman <ddbjorkman@VERIZON.NET>
Re: advice on new propane tank (135 lines)
From: Neil2 <vidublu@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (40 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (50 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: Hatchback struts (220 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (64 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (56 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: advice on new propane tank (16 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: Hatchback struts (241 lines)
From: Alistair Bell <albell@SHAW.CA>
Another strut use. (24 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: advice on new propane tank (22 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (65 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: Throttle Body Switch Cam (7 lines)
From: Karl Mullendore <tdiguru@WESTYVENTURES.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (27 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Hatchback struts (17 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Hatchback struts (31 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: Hatchback struts (30 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: Hatchback struts (25 lines)
From: David <fjazzbass@GMAIL.COM>
Re: Hatchback struts (26 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Hatchback struts (38 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: Hatchback struts (40 lines)
From: Roman Haag <romanhaag@YMAIL.COM>
Re: advice on new propane tank (38 lines)
From: Mark McCulley <markmcculley@GMAIL.COM>
Re: advice on new propane tank (47 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
VanAlert is 10 weeks old today... (25 lines)
From: Abel Longoria <houstonphotog@GMAIL.COM>
Ideas about funding Vanagon.com (47 lines)
From: kenneth wilford (Van-Again) <kenwilfy@COMCAST.NET>
Re: Ideas about funding Vanagon.com (74 lines)
From: Abel Longoria <houstonphotog@GMAIL.COM>
Re: Ideas about funding Vanagon.com (87 lines)
From: Abel Longoria <houstonphotog@GMAIL.COM>
Re: Hatchback struts (57 lines)
From: Neil2 <vidublu@GMAIL.COM>
Re: VanAlert is 10 weeks old today... (43 lines)
From: John Rodgers <jrodgers113@GMAIL.COM>
Re: VanAlert is 10 weeks old today... (51 lines)
From: Abel Longoria <houstonphotog@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (78 lines)
From: OlRivrRat <OlRivrRat@COMCAST.NET>
Re: propane copper tubing 3/8" type K , rigid or soft (95 lines)
From: Neil2 <vidublu@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (107 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: Another strut use. (40 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (134 lines)
From: David McNeely <davmcneely40@GMAIL.COM>
Re: Another strut use. (40 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Re: Another strut use. (50 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Digest mode? (15 lines)
From: ERIC WILCOX <ewilcox1@ME.COM>
Re: Another strut use. (66 lines)
From: Alistair Bell <albell@SHAW.CA>
Digest mode? (21 lines)
From: ERIC WILCOX <ewilcox1@ME.COM>
Re: Another strut use, now SS stove lid prop (73 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Re: VanAlert is 10 weeks old today... (26 lines)
From: Pete O <pnoceanwesty@GMAIL.COM>
Re: VanAlert is 10 weeks old today... (31 lines)
From: Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Re: Another strut use, now SS stove lid prop (80 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: Another strut use. (75 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (42 lines)
From: Frank Condelli <RAlanen@AOL.COM>
Re: Hatchback struts (39 lines)
From: Frank Condelli <RAlanen@AOL.COM>
Re: Ideas about funding Vanagon.com (88 lines)
From: Frank Condelli <RAlanen@AOL.COM>
Re: Another strut use, now SS stove lid prop (103 lines)
From: kenneth wilford (Van-Again) <kenwilfy@COMCAST.NET>
Re: propane copper tubing 3/8" type K , rigid or soft (35 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: propane copper tubing 3/8" type K , rigid or soft (51 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (58 lines)
From: Alistair Bell <albell@SHAW.CA>
Re: propane copper tubing 3/8" type K , rigid or soft (70 lines)
From: Jeff Palmer <w.jeff.palmer@ICLOUD.COM>
Re: propane copper tubing 3/8" type K , rigid or soft (20 lines)
From: David Beierl <dbeierl@ATTGLOBAL.NET>
Re: propane copper tubing 3/8" type K , rigid or soft (69 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
2nd propane tank & tank inside (21 lines)
From: Richard A Jones <Jones@COLORADO.EDU>
Re: 2nd propane tank & tank inside (36 lines)
From: Aristotle Sagan <killer.jupiter@GMAIL.COM>
Re: Ideas about funding Vanagon.com (141 lines)
From: Frank Condelli <RAlanen@AOL.COM>
Where can I get stainless steel screws for mirrors? (14 lines)
From: Jim Felder <jim.felder@GMAIL.COM>
Re: Makeshift Clutch Alignment Tool (16 lines)
From: Larry Alofs <lalofs@GMAIL.COM>
FS: cheap '87 Westy in NY $6 grand (14 lines)
From: JordanVw@AOL.COM
Re: Where can I get stainless steel screws for mirrors? (27 lines)
From: Alistair Bell <albell@SHAW.CA>
Sometimes you just gotta hear the Vanagon Song (Explicit Lyrics) (20 lines)
From: Richard Koerner <rjkinpb@SBCGLOBAL.NET>
Re: Makeshift Clutch Alignment Tool (40 lines)
From: David <fjazzbass@GMAIL.COM>
Re: Another strut use, now SS stove lid prop (105 lines)
From: Stuart MacMillan <stuartmacm@GMAIL.COM>

Back to the main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.