Date:         Mon, 10 Jan 2000 12:23:57 EST
Reply-To:     KENWILFY@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         KENWILFY@AOL.COM
Subject:      Inline-4 Cylinder kit Ready $2200
Content-Type: text/plain; charset="us-ascii"

I have finally finished getting together the kit for putting the inline
4-cylinder motor (Jetta, Golf, Scirocco) into a waterboxer Vanagon.  Most of
the parts are VW factory parts.
The kit is $2200 and includes:
All preformed coolant hoses
Expansion Tank
Accelerator Cable
Accessory Brackets for mounting power steering, Alternator, and Air
Conditioning compressor.
Adapter Plate and Flywheel (Manual Trans)
Sachs Clutch Kit
Special Oil Pan and Pickup tube
Both engine mounts and engine carriers.
The kit is setup to put the engine as the stock Diesel Vanagon tilt to allow
the motor to fit under the rear deck lid with no modifications.  You may have
to modify your driver's side firewall depending on which engine you use.
The "kit" doesn't come with instructions.
If you have any questions please email me or call at one of the numbers below.

Thanks,
Ken Wilford
http://www.vanagain.com
John 3:16
Phone: (856)-765-1583
Shop:   (856)-327-0027
Fax:     (856)-327-2242