Date:         Tue, 11 Jan 2000 05:56:33 EST
Reply-To:     BenTbtstr8@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Benjamin Tan <BenTbtstr8@AOL.COM>
Subject:      Re: Windscreen removal & replacement
Comments: To: pmarston@instech.co.uk
Content-Type: text/plain; charset="us-ascii"

Try this on your bad windshield first. A little crude perhaps, but I have not
lost a windshield or window yet. Bruce at Tassi Inc. in Colma showed be a
quick and dirty way to pop-out windows and windshields (for early models
without glue in the channel).

Turn your back to the subject windshield. Kick backwards firmly with your
rubber soled heel at the edges of the glass. Once the seals are popped. You
just pull the windshield out.

This procedure is not for the faint at heart.

BenT
San Francisco

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.