Date:         Mon, 17 Jan 2000 18:30:58 -0800
Reply-To:     Mike Miller <mwm@LANSET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Miller <mwm@LANSET.COM>
Subject:      Re: "Sunny" in the shop for a TDi transplant!
Comments: To: "Michael J. Sullivan" <sullivan@OPENMARKET.COM>
Content-Type: multipart/alternative;

Mine is 9 1/2 x 5 1/2 x1 3/4 inches without the heater valve [I assume you won't need that].  The reason I know is I measured it and the reason I could do that is that it is out of the heater for the dreaded rear heater leak.

Good luck,

Mike
  ----- Original Message ----- 
  From: Michael J. Sullivan 
  To: vanagon@GERRY.VANAGON.COM 
  Sent: Monday, January 17, 2000 1:17 PM
  Subject: Re: "Sunny" in the shop for a TDi transplant!


  Dear List,

  Does anyone have the dimensions of the stock Vanagon rear heater core?
  You know, the one under the rear seat?
  (My van is presently in the shop, so I can't take measurements)


  At 08:48 AM 1/17/00 -0800, Mike Miller wrote:
  >>>>
  How about a rear hearer core?

  Mike
  Sacramento


  Cheers,


  Michael J. Sullivan
  Marshfield Hills, MA
  Tierra del Fuego 2000 or bust!

  '87 VW Vanagon GL Syncro Westfalia "Sunny" (soon to be TDi-powered)
  '89 Audi 200 Turbo Quattro Wagon "Wizard" (soon to be for sale)
  '96 VW Passat TDi "Teddi" (46mpg)

  *********************************************
  work: http://www.openmarket.com
  my vanagon: http://www.hsdesign.com/vanagon
  scan tips: http://www.hsdesign.com/scanning
  *********************************************

[text/html]