I pulled the passenger side axle off the other night and cleaned it up. It's fine, no scoring, pitting etc.; it looks brand new in there and well greased. I reinstalled and the symptoms still persist. The problem is intemittent...sometimes when I start moving in 1st gear a loud clunk can be heard from the passenger side rear. While the van is in gear and moving a clicking noise can be hard from the same area in time with the RPM, especially around tight corners, or hills. I am very confident both axles/CV's are fine. Could this be a bearing in the transmission? Any suggestions would be greatly appreciated. Thanks in advance, SPC 87 Westy ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.