Oh, and one other question - Bentley specifies "MSO2" lubricant" for these internal plastic parts. I have some assembly lube that says MSO2 on it, would that work? Or is this just standard wheel bearing grease? (Which I of course have none of in stock...) Brent Christensen '89 GL Syncro Westy "Klaus" Santa Barbara, CA -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Brent Christensen Sent: Saturday, January 29, 2000 1:03 PM To: vanagon@GERRY.VANAGON.COM Subject: Shifter bushing assembly
OK - I'm finally around to replacing all the "guts" of my shifter. I have removed the shell that contains all the plastic bits, and I can't figure out how it is supposed to come apart. Does the whole assembly press-fit into the steel shell (and therefore press back out), or is there another trick? Brent Christensen '89 GL Syncro Westy "Klaus" Santa Barbara, CA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.