Z, The restrictor should be in one of the two hoses that lead to and from the rear heater. It is pushed into the hose at the heater end. Walt Spak Pittsburgh, Pa. wnsopc3@3rdm.net ----- Original Message ----- From: Zoran Mladen <Zoran_Mladen@AMSINC.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, January 31, 2000 3:24 PM Subject: Vanagon heater restrictor
> Hello all! > > This is my first use of this mailing list, and I'm not sure if I am doing this > correctly, but here goes! > > I have an 84 Vanagon water-cooled. There are two factory metal T-fittings that > splice off water to the inside of the vanagon to provide heat for the front and > rear heaters. Looking at a factory repair manual, it notes that new plastic > T-fittings are available - I have these. It also notes that there is an in-line > restritor somewhere, but does not identify where. Anyone know its location??? > > Thanx! > > Z |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.