Swing the wiper out, undo bolt on spindle, lift arm off spindle and replace on a different spline. If the space btw the splines is filled with metal from the wiper arms, dig it out and then tighten wiper arm firmly onto spindle to cut new splines in the socket in the arm. d At 09:48 PM 2/1/2000 -0500, Woody Halsey wrote: >Dear List, > >How do you adjust the swing of the wipers? Mine are sitting too low at >rest. > >Thanks, > >Woody David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.