I would appreciate hearing from other list members on how they have their S&S exhaust system mounted. Mine is only held up by the bolts onto the heads and a connection between the muffler and the frame. The designers of the S&S system may have figured that struts form the old exhaust system would be used, but they were not on my van to begin with. Also, the old muffler was hooked to the frame. It would be most appreciated if someone could tell me how it should be done as I am popping bolts from the left rear header. John Lauterbach Macon, GA 1984 DL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.