Ken, when I had to redo things last year, the only tubing I could get my hands on is marked 13 mm (1/2 inch) heater hose. This is going from the cold start valve to some other connections leading to the inlet manifold. What I need is honest to goodness high vacuum tubing. John Lauterbach ----- Original Message ----- From: <KENWILFY@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, January 31, 2000 9:09 AM Subject: Re: Vacuum line P/N's
> The best way to deal with the vacuum line issue is to measure the inside > diameter of the hose with a ruler in milimeters. Give me the numbers that > you need and I can get the hose for you. I would check this for you myself > but I don't have any 1.9l motors here right now. > > Thanks, > Ken Wilford > http://www.vanagain.com > John 3:16 > Office (856)-765-1583 > Shop (856)-327-0027 > Fax (856)-327-2242 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.