Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2000, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 7 Feb 2000 05:19:03 -0500
Reply-To:     McComas_Glenn <mccomas@SHORE.INTERCOM.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         McComas_Glenn <mccomas@SHORE.INTERCOM.NET>
Subject:      Pinstripe Removal
Comments: To: rileyk@HOME.COM

Riley ------ You didn't say whether your pinstripes are paint or tape. Take a close look (maybe with magnifying glass) and/or check with a sharp fingernail. The tape has a thickness which you can feel. If your stripes are tape, you may be able to remove them rather quickly using a heat gun. Be aware with tape stripes -- sometimes in the event of repair/repainting, they mask along one side of the pinstripe, so it becomes the line across which they stop painting. Then you've got another situation. I'd recommend checking with your friendly local autobody guy. (Acronym FLAG??)


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.