Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2000, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 7 Feb 2000 07:43:34 -0800
Reply-To:     Tom Young <tomyoung1@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Young <tomyoung1@HOME.COM>
Subject:      Re: Case and p[istons shot?
Comments: To: Sean Garrett <seangar@HOTMAIL.COM>
Content-Type: text/plain; charset="iso-8859-1"

The cases/cranks used in the air-cooled Vanagons are all the same whether carburated or FI. The bottom end of these motors is very strong and unless something catastrophic happened inside the case itself the case is probably OK, though it may need an align-bore. I doubt you're seeing "stress marks" over the top of the case; I've seen motors with some sort of flashing left over from the casting process but the case itself was OK. Take the case to a qualified shop and have them look it over.

--------------------------------------------------------------------------- Tom Young tomyoung1@home.com Lafayette, CA 94549 '81 Vanagon --------------------------------------------------------------------------- ----- Original Message ----- From: "Sean Garrett" <seangar@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, February 07, 2000 6:57 AM Subject: Case and p[istons shot?

> Well I removed and disassembled my FI 2L 1980 this weekend. The 3 and 4 > Cylinder side of the case has stress marks (my guess) all over the top > portion of it. It looks like a very old painting. The piston skirts on all > the pistons are brown (discolored) and the #1 cylinder dropped a seat that > exploded and welded itself all over the head and piston. My question is > this: should I just throw in the towel here and look for another block and > pist/cyl set? or should I take to a shop and have then tell me what parts > are good (possible 3 cyl/pistons and crank?). My 5th sense tells me the case > is shot and most likely everything else. I know where there is 2L (1980) > that had a carburated system on it. will this be a different case/crank > (etc...) than the Fuel Injected? My motor is FI. > > Sean > ______________________________________________________ > Get Your Private, Free Email at http://www.hotmail.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.