John, some of the list vendors have replacement instrument clusters at a price that is probably cheaper than buying parts, particularly the printed circuit "board" that connects to all these gauges. John Lauterbach Macon, GA 1984 DL ----- Original Message ----- From: John Roe <jroe67@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, February 13, 2000 6:48 PM Subject: Tach, gas, & temp gauge don't work: 90Westy
> Hello, > > I just bought a 90 Westy & the Tach, gas, & temp gauge > don't work. As these are all on the same side of the > instrument cluster it seems that these problems are > most likely related. > > Before I tear into the insturment panel & start poking > around I thought I'd see if there were any ideas. Is > there a relay, switch, etc that would control all > three? > > Thanks for any suggestions. > > John > __________________________________________________ > Do You Yahoo!? > Talk to your friends online with Yahoo! Messenger. > http://im.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.