At 7:14 PM -0700 2/10/2000, BILL wrote: >Your spring loaded latch has a flat tip screw at the bottom of it. Remove >this and take off the latch, spring and screw. You will see two screws that >are probably tight already. Your rubber has shrunk that goes between the two >pieces that are sandwiched together on the glass. You can get new rubber >seals from dealer and reassemble. When I tinted my windows that gave it >enough extra width that it tightened back up. If your a frugal zealot like me, you could cut a peice of old inner tube to the shape (stack if necessary). That should work as well. Later, Dave C. Williamsburg, VA zzzzzzzzzz__ |E[__] [__]|[_]\\ | _DC&SP | _ || * * * =-( )---------( )--= '85 GL Westy (His) '91 Cabriolet (Hers) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.