In a message dated 02/09/2000 8:38:41 AM Eastern Standard Time, firestream@mindspring.com writes: > > Would one of these fit a syncro? > Unfortunately no, it is does not have a front drive shaft, it is two wheel. BUT you might be able to SWAP the .483 Ring and Pinion WITH the .457 Ring and pinion and ACHIEVE the SAME RESULTS!!! The front VC is driven by the shaft from the trannys mainshaft. Talk to Weddle to see what the .457 R&P change would cost. www.2weddle.com Robert |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.