Date:         Sat, 12 Feb 2000 11:37:29 -0800
Reply-To:     Dana Morphew <kdm@WHIDBEY.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dana Morphew <kdm@WHIDBEY.COM>
Organization: Dana's Mobile Carpet Steam
Subject:      Re: oil cooling
Content-Type: text/plain; charset=us-ascii

The oil flows in through the perimeter holes and out the big center
hole.

-Dana-

> such a thing as an inline thermostat and can the oil be too cool? Which way
> does the oil flow into the filter, through the center and out the side or
> vise versa. The little driving I have done shows 180-200 deg on the oil temp
> gauge that was installed at the same time.
>
> Any comments?
> Myron Lind
> Harrisonburg, VA

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.