Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 12 Feb 2000 22:01:53 -0500
Reply-To:     "Horace K. Sawyer" <firestream@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Horace K. Sawyer" <firestream@MINDSPRING.COM>
Subject:      Re: Melissa in Detroit van is toast:  FOR NOW . . .
Comments: To: Vwvangrrl@AOL.COM
In-Reply-To:  <78.165fc71.25d7421d@aol.com>
Content-Type: multipart/alternative;

Melissa, sorry to hear the motor is toast. If you have the skills of a mechanic, and are qualified to do the job, you can do it. But then you wouldnt be asking this question. Let's face it, chances are high you are not qualified. Result: waste of your time, money, and expensive new parts. Disaster. You will tear up more than you will fix. Bad bad idea.

Even experienced non-VW mechs have problems with these motors, so the chances of you doing the job properly is slim to none. Hate to be the bearer of bad news, but some people on the list have the attitude if THEY can do it, you can too. That is optimistic, but not always true. If the van is good to excellent otherwise, and if you like the van, (they ain't makin' any more of 'em baby) spend the money and take it to an experienced VW mechanic who does not "run away" from you when you describe the problem. Best: find a shop dedicated to VW. Not necessarily by any means the dealer.

Otherwise, you could be looking at best to pay somebody to fix the mistakes you WILL make, or paying for a crappy job at a second rate place, and then having another crappy repair to "make it right" and it goes on, and on. You keep bringing the van back because something "is not the way it used to be." Do not go to some outfit who works on all types of vehicles. They are just in it for the money. Get it to a purist. Truck it, rollback it, or whatever, but do it.

It can be done!

Now let's see some results!

good luck, HK

No, I am not a mechanic : ) But I can second-guess with champions, and I have torn up more stuff than you will imagine

At 06:09 PM 2/12/00 -0500, you wrote: >I am totally bummed out - >I currently own a '90 Vanagon and recently found out that the head gasket is >cracked. I really need some advice - Can I do this job myself or do I have >to spend the money on labor? I love my van - any ideas, or mechanics in >Detroit area that would consider a payment plan??? >I am desperate - my husband wants to sell and cut our losses...


[text/html]


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.