Another question, I need to know what wires go to what terminals on the ignition coil on my 1982 air cooled westy. I have a green wire from the points/condenser in the distributor, a wire coming from the fuel injection control unit, and a double black wire that connects together into one spade connector coming from the wire harness on the left side of the engine compartment. There are male spade connectors terminal #1 (negative -) and terminal #15 (positive +) on the coil. What wires go where? Thanks for the advice yesterday on my vacuum line routing and thanks in advance for any advice. Dave Seasholtz |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.