Date:         Sun, 20 Feb 2000 15:24:29 -0800
Reply-To:     bpchristensen1@HOME.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Brent Christensen <bpchristensen1@HOME.COM>
Subject:      Re: Mild Vanagon - Carpet questions
Comments: To: Mark Mages <wasserbox@YAHOO.COM>
Content-Type: text/plain; charset="iso-8859-1"

Mark:

AFAIK carpet splicing is usually done with a special tape that looks a lot
like duct tape but is red (at least the ones I've seen are).  You have to
make two perfectly even cuts, then stick the tape against the back side of
one of the seams.  Then carefully lay the second piece up against the first,
sticking it down onto the tape.  The trickiest thing is getting the edges to
butt up against each other well without any gaps.

I've done this with berber and industrial (low pile) carpeting, but never
with a medium or shag pile carpet.  It is pretty easy.  You do need a SHARP
carpet knife, a long T-square, and a large cutting surface.

Brent Christensen
'89 GL Syncro Westy
Santa Barbara, CA

----- Original Message -----
From: Mark Mages <wasserbox@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, February 20, 2000 3:13 PM
Subject: Mild Vanagon - Carpet questions


> One of my neighbors just re-carpeted their house, and
> I was the beneficiary of the ends & scraps.  It is
> really nice grey-green stuff.
>
> I want to put it in the kitchen area of my westy, but
> the roll I have is about 2/3 the width I need.
>
> I have no idea how to splice carpet, but I want to
> know.  If anyone knows please lemme know.
>
> This is one of the few aspects of construction I know
> nothing about.
>
> Thanks
>
> =====
> Mark
>
> 87 Westfalia Gl
> 84 Scirocco 8v
>
> http://members.tripod.com/~jehanno
>
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com