VANAGON archives -- February 2000, week 3 (#671)

Date:         Mon, 21 Feb 2000 08:38:43 -0700
Reply-To:     Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Subject:      Re: Front Heater Valve Replacement
Comments: To: KENWILFY@AOL.COM
Yep, it does work.  BTDT

Karl Wolz

----- Original Message -----
From: <KENWILFY@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, February 21, 2000 7:34 AM
Subject: Re: Front Heater Valve Replacement

> How about using two small wood clamps with a couple of pieces of wood each
to
> clamp the hoses coming into and going out of the valve.  Then when you
remove
> it you will lose a minimal amount of coolant and probably will not need to
> rebleed (I leave this up to you).  I have never tried this, but it would
work
> as long as you have enough space to get the clamps on the hoses.
> Hope this helps.
>
> Ken Wilford
> http://www.vanagain.com
> John 3:16
> Office (856)-765-1583
> Shop (856)-327-0027
> Fax   (856)-327-2242

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.