I disconnected from the fuel filter (the large metal filter between the pump and the injectors) the hose which connects the filter to the fuel pump in order to test the fuel delivery rate of the fuel pump. I found that rate to be quite adequate. While conducting this test I was forced to plug the open end of the hose coming from the injectors because fuel was siphoning through the system. My question: Would a properly functioning fuel pressure regulator allow the reverse flow of fuel through the system at a rate to sufficient to cause this siphoning action? If not, can this be construed as a sign of a defective fuel pressure regulator? I know this reversed flow was not caused by accumulated pressure in the tank because I removed the gas cap so as to allow any pressure to vent. Would it now be appropriate to test the operation of the regulator by applying a test gauge to the line? I am searching for the cause of an intermittent dying condition not caused by electrical malfunction. Any help would be greatly appreciated. Rico Dagastino Munford, TN 84 GL "Thing 1" 87 GL "Thing 2" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.