In a message dated 2/27/00 1:07:25 PM Eastern Standard Time, mike_l_f@HOTMAIL.COM writes: << Looks like I need a new cable. Should I check the heater valve before just replacing the cable? >> I am in the same boat with my cable on my '82. You can check the operation of the valve by disconnecting it from the cable and moving it w/ your fingers. Should move very easily. My wire was crimpoed and I attempted to straighten it. Worked for a day or so and then it crimped again. My experience with them is that once they are crimped, you will continue to have the same problem, even if you can get it to work again for a short while. BTW, a friend of mine used regular bicycle brake cable on his and it seems to work well. I believe you can get this at Wal-mart or K-mart for real cheap and cut it to length. My .02 Stefan Weir "We Spend All Of Our Lives Trying To Save Time, But In The End There's Really None Left" - Jerry Seinfeld |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.