I have a 1982 Aircooled Vanagon Westy and have been working on the rear brakes and axles; rebuilding the whole lot. As I was reassembling my rear brakes, I realized I had lost the top bolt that holds the bearing housing, backing plate and wheel clinder housing together. I checked the other side and it looks to be a 13 mm head. When I go to the FLAPS, what do I need to ask for? (as you can tell, I'm not familiar with the terminology of metric hardware)
TIA Robert *please reply via pmail, I'm not currently subscribing to the Vanagon List* |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.