Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2000, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 Feb 2000 09:16:10 -0500
Reply-To:     "Carrington, Tom" <tcarrington@RELITECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Carrington, Tom" <tcarrington@RELITECH.COM>
Subject:      Re: Question: Bolt Size
Comments: To: "Robert S. Williams, MD (laptop)" <rwill@CENTURYINTER.NET>
Content-Type: text/plain

That would be 8mm x 1.25 thread pitch. Also referred to as 8x1.25mm.

TomC tcarrington@relitech.com http://www.relitech.com/tomc http://volksweb.relitech.com 85 Vanagon Crew Cab 82 Westy diesel=>gas conversion 65 Notchback

> -----Original Message----- > From: Robert S. Williams, MD (laptop) [SMTP:rwill@CENTURYINTER.NET] > Sent: Monday, February 28, 2000 5:06 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Question: Bolt Size > > I have a 1982 Aircooled Vanagon Westy and have been working on the rear > brakes and axles; rebuilding the whole lot. > > As I was reassembling my rear brakes, I realized I had lost the top bolt > that holds the bearing housing, backing plate and wheel clinder housing > together. I checked the other side and it looks to be a 13 mm head. When I > go to the FLAPS, what do I need to ask for? (as you can tell, I'm not > familiar with the terminology of metric hardware) > > > TIA > > Robert > > *please reply via pmail, I'm not currently subscribing to the Vanagon > List*


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.