Date:         Wed, 23 Feb 2000 13:13:50 -0800
Reply-To:     Mark Drillock <drillock@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Drillock <drillock@EARTHLINK.NET>
Subject:      Re: Replacing brake rotors [Syncro]
Comments: To: BRENT CHRISTENSEN <bchristensen@INFOGENESIS.COM>
Content-Type: text/plain; charset=us-ascii

Brent, on most Vanagons the front wheel bearing races are pressed into
the rotors so changing the bearings is convenient when changing the
rotors. Not on Syncros and at least some South African 2wd models, as
these have rotors that can be easily changed without involving the
bearings. If you are changing the lower ball joints on your Syncro, I
think that you will have the bearing housings out anyway. Given the
~200K miles on it, I would change the bearings while it is apart to save
labor charges later. The bearing do wear out.

Mark

BRENT CHRISTENSEN wrote:
>
>    Part 1.1Type: Plain Text (text/plain)