Date:         Sat, 26 Feb 2000 06:59:24 EST
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         RAlanen@AOL.COM
Subject:      Re: WTB: Stove face
Content-Type: text/plain; charset="US-ASCII"

In a message dated 2/25/00 11:52:23 PM Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

<< Re: WTB: Stove face >>
    HA ! Funny you should ask !  I just did this last week !  I didn't even
try posting a message about where to find those decals as I was sure that's
not possible.  ANYWAYS, what I did was this : Took some small pieces of
masking tape and very carefully masked off the outer edges of the two
triangle shapes and where the star is for the fridge light I made a circle
piece of masking tape to just fit over the star.  Before masking I sanded
smooth the plate with #220 sandpaper and cleaned it well with paint prep.
After all was masked, I spray painted it with grey TREMCLAD rust paint.  It
Looks fine and the rust & nicks are gone.  BUT......it sure would be nice if
those decals were available !

Cheers

Frank Condelli
'87 Westy & Lionel Trains
Almonte, On
Visit me on the web.......> <A
HREF="http://members.aol.com/RAlanen/index.html">Frank, Rita & April's Website
</A>