Date:         Mon, 6 Mar 2000 12:44:43 EST
Reply-To:     EVEHART33@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Hunter <EVEHART33@AOL.COM>
Subject:      Re: windshield washer don't work
Comments: To: PGB@dolby.com
Content-Type: text/plain; charset="US-ASCII"

Pull the steering wheel. Remove the wire leads to the turn signal/wiper/light
switch cluster. Remove the three screws that hold the assembly to the column
and remove the assembly. Simulate operation of the washer function  on the
assembly and note where the contacts are touching. Use an ignition points
file or fine emory to clean the contacts. Re-install. This should fix the
problem. If not check that the washer motor is working.

Ken Hunter
82 Westy 1.9D
84 Jetta 1.6D
89 Mitsubishi van

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.