Date:         Tue, 7 Mar 2000 06:24:21 -0800
Reply-To:     Max/Joyce Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max/Joyce Wellhouse <maxjoyce@IPA.NET>
Subject:      Shift pattern from down below?
Content-Type: text/plain; charset="iso-8859-1"

When you stare up through the shifter housing from the rear of the van's
underneath(4 speed, 091-1), what should I except to see as an assistant
shifts from first to fourth? Bentley doesn't  cover the position of the
shifter tangs as they move laterally from 2nd to 3rd,just the "a" gap with
the shifter at rest.  My gap is less than the 29/32" asked for but I'm still
not sure how to figure if the shifter inneutral is supposed to be measured.
Help me, oh please!  TIA

Dimwitted Moose and Flying Squirrel.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.