> harald-nancy wrote: Well, the bushing I have in front of me ( "elastmetall" 202346 LME Germany 251407077) is very tight inside. The rubber inside is actually somewhat under pressure, really pressed in. Silicone paste would be the ideal lubricant, but I don't think there is a way to get any more in there. If you drill a hole and install a grease nipple on the outside, you would damage the bushing too much. Dcates1@home.com writes: The Company that I work for manufactures greasing equipment. I have not yet looked at my squeaking passenger side bushings, but we make an injector needle for grease that might work perfectly. Maybe I will take a look and see this weekend if that kind of setup might work. If it will, I will try injecting some silicone grease into the creaking joint. But, it has kind of quit creaking now that the weather has warmed up. Tom Cates 83 Westfalia, "Hammurabi" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.