Date:         Sat, 11 Mar 2000 12:43:38 -0800
Reply-To:     Brent Christensen <bpchristensen1@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Brent Christensen <bpchristensen1@HOME.COM>
Subject:      Front Brakes & Ball joint Q's [Syncro]
Content-Type: text/plain; charset="iso-8859-1"

Hey boys and girls - I am elbow deep into my front end refurbishment project
and I have a couple questions:

My lower Driver's Side ball joint, sure enough is toast (luckily I have them
in stock!)  In the Bentley, it shows them being PRESSED in and out with a
hydraulic press.  Is this necessary?   Also, it shows some monkey business
with the "Control Arm Adapter" saying that it MUST be installed first, blah
blah blah - does it have to even come out?  (Looks like a monster nut
holding it in place...)

Also, the diagrams in the Bentley for the front brakes don't even show the
Syncro version.  It does say about 15 times that there are a bunch of
fasteners that MUST be replaced, though they look completely different from
the Syncro versions.  Any of these fasteners really need to be replaced on a
Syncro?

Thanks in advance!

 Brent Christensen
'89 GL Syncro Westy "Klaus"
Santa Barbara, CA

Brent Christensen
'89 GL Syncro Westy "Klaus"
Santa Barbara, CA