Date:         Mon, 13 Mar 2000 11:48:02 EST
Reply-To:     JKrevnov@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rico Sapolich <JKrevnov@AOL.COM>
Subject:      Re: Anyone Who Knows Which End of a Soldering Iron Is Hot
Content-Type: text/plain; charset="US-ASCII"

Can anyone identify the output device in the Idle Stabilizer Control Unit?
This is the one which powers up the Idle Stabilizer Contol Valve.  Its case
looks like a T-045/S-022/S-023 style but, its dimensions are slightly
smaller.  In both controllers I have popped open, the conformal coating on
these devices has been toasted to an opaque brown which makes their ID's
unreadable.  After carefully removing the burnt coating, no trace of the ID
numbers could be found.

What is it?

Rich

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.