Date:         Mon, 13 Mar 2000 21:06:19 -0600
Reply-To:     Roy Mellor <roym@ARISTOTLE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roy Mellor <roym@ARISTOTLE.NET>
Subject:      How best to JB weld pitted heads?
Content-type: text/plain; charset="US-ASCII"

Volks,

I'd appreciate the list's advice before I try this one.

I'm doing the head gaskets on my '85 Westy and want to use JB weld to fill
in the pitting on the heads. I've never used the stuff before but am ready
to give it a try. Could anyone who has "been there and done that" help me
out here? What's the best way.

I've search the archives as best I can and can't find a "how to" on this
one.
Doesn't seem to be covered in Bentley either ;-)

TIA,

Roy Mellor
'85 Westy "Humbert"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.