Can anyone suggest the easiest way to remove the starter from my 1987 Syncro? I assume that it is the same procedure on just about any Vanagon of that vintage, but I don't know how to do it. It looks like there are two (15mm?) nuts to be removed. The bottom one is no problem to get at but the top one seems to be in an impossible position. Do I attack it from the top or from beneath the van? If I try to get at it from on top it looks like there are a lot of hoses and things to be removed first. Are there any special tools that will get that top nut off? Looks like maybe a longish bendable socket shaft might get in there from below but I'm not sure if that will work. Thanks for your help. Dick Taylor hetchins@montana.com
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.