When I came to my van I saw a large stain on the concrete under my head on the left side. I thought that the oil cooler hose had leaked (The Brazilian hose was slightly undersized for the stock clamp and started to leaked a little) But it was tight- no leaks. I looked around the head and no leaks. Upon further investigating, I discovered oil leaking from the ac compressor- oh no a new compressor :<( . But as I was checking for the source of the leak I discovered that the line coming from the body had worked itself loose and the oil leaked from the joint.. The hose can work itself loose causing all the oil and refrigerant to be lost. Check the nut for tightness
I had a warning sign, but misdiagnosed it. I had just replaced the valve cover after adjusting the valves and thought it was simply leaking and spraying oil out. I also noticed that the AC was not as cool as normal- thought, “It needs time to cool down.”
So check to see if your line is tight. Before you loose your cool... I had been reading about the retrofitting my AC... Robert |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.