Date:         Tue, 21 Mar 2000 17:25:01 -0800
Reply-To:     Michael Snow <mwsnow@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Snow <mwsnow@HOME.COM>
Subject:      Re: '90 Vanagon Jump Seats and Rear Bench/Bed
In-Reply-To:  <DFF1DE9BFABDD211A6F400A02461FE6F01571265@xsf1.dolby.com>
Content-Type: text/plain; charset="iso-8859-1"

When I went to the local dealer, the bar was $68.  To do a complete factory
style installation requires brackets that fit into the battery box, under
and on top of the floor, and of course, behind the fuel overflow tank.  The
floor brackets fit together on opposite sides of the van floor.  I got all
this info from carefully reproducing the exploded parts diagram in the
dealer microfiche and examination of a Carat with the actual seats.  I can't
see a way to do it (the right way) without dropping the tank, which is why
my jump seat is still in the garage.  Soon :-)  I suggest that anyone who is
trying to install the jump seat take a long look at the fiche to see how it
fits together.  It actually makes sense once you see the whole thing.

Mike Snow
1982 Westfalia 1.6TD
1983 ASI 1.6D



The passenger side seat fits right into you Westy.  If you want to mount the
driver side seat on the passenger side you'll need a new bar (probably
$50-$100 at the dealer).

I got a passenger side seat from a junk yard and now I'm trying to figure
out how to mount it properly into my Syncro Westy.  I can't figure out how
those bottom brackets are supposed to be welded in.  Can anybody help?
Thanks,
Peter