Date:         Tue, 21 Mar 2000 21:09:28 EST
Reply-To:     Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Subject:      head gaskets
Content-Type: text/plain; format=flowed

hey all,
when sealing head gaskets. is it okay to take fine sand paper to the sealing
surface to remove the adhesive from the last gaskets and smooth the surface.
or is there a better way to remove that gum and gasket remainders? my
concern is that i don't want to uneven the sealing surface any and result in
another leak down the road (no pun intended). am i paranoid or what?
thanks
jason
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.