Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2000, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 15 Mar 2000 18:14:44 EST
Reply-To:     FrankGRUN@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Grunthaner <FrankGRUN@AOL.COM>
Subject:      Re: Digitool diagnostics
Comments: To: drillock@earthlink.net
Content-Type: text/plain; charset="US-ASCII"

In my implementation of the Digitool, Darrel made up the box, and we used a regular DB 25 cable with one connector removed. I spliced (soldered) the DB 25 cable at the point where the wire harness goes into the connector which enters the ECU. Net result, no modifications to the ECU. I have one chipped (AMS, Digifant II) ECU and one stock spare that I swap around during trouble shooting. No problem, straightforward if you read the Bentley wiring diagram. Works perfectly.

Frank Grunthaner


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.