FWIW, you don't chop up your old wiring harness to add a Digitool - that's not required. You do have to solder the wires from the digitool cable to the ecu - but that's easy. IMHO, what you are proposing would be unreliable, as you add another set of connections/problems. Marshall Ruskin 84 Westy
>Hello all, I am trying to hook up the digitool to my 81 Westy, but I don't >want to chop up my wiring harness. Anyone out there got a bad ECU and wire >harness so I could tear into that, make an adapter with the old harness that >plugs into my ECU, and then plug my harness into the modified (old) ECU. All >the wires for the digitool could come off the splice. Any help, anyone? > >Myron Lind >Harrisonburg, Virginia >81 Westy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.