Date: Thu, 30 Mar 2000 15:52:46 -0500
Reply-To: Todd Kaderabek <todd@LARKBOOKS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Todd Kaderabek <todd@LARKBOOKS.COM>
Subject: <no subject>
Content-type: text/plain; charset="US-ASCII"
Date: Thu, 30 Mar 2000 09:52:00 MST
From: Sean Garrett <seangar@HOTMAIL.COM>
Subject: Re: Kayak Transport on a Westy
I have transported whitewater kayaks for years and (welded my own racks too)
the main concern you should have is: Yours is NOT a whitewater kayak ( I
think) therefor it is wider in girth and more like a fat pig in the center.
If it is truly a sea kayak then this is not so. It would be skinny. If you
stack it like whitewater boaters you might NOT have the clearence you need
in the middle of the boat. That is, the cockpit of the boat might rub the
top of the van. Your towers on the racks would have to be tall to allow for
that clearence. Rack manufactures have made parts to accomodate this but I
have heard lots of whistling from racks that are like this. You want to keep
the boat as close to the van roof as possible to avoid vibration and noise
while in transit. I would suggest foaming it with fore and aft tiedowns to
the bumbers and straping it in the middle if possible till you can get a
good idea of the clearence issue.
---------------
Technically that boat is not a sea kayak, and it certainly is not a
whitewater kayak. It is a touring kayak. I own two of them, one the tandem
version of the Old Towne model in question. It will stack, centered on the
rack, without coming even close to the top of the vehicle. And when stacked
they make virtually no noise at highway speeds. The biggest concerns in
transporting boats this big are:
1 -- proper tie down. Yakima (and other) kayak stackers provide security
by pulling in both a downward fashion, and a sideways fashion, literally
lashing the both in two directions to the rack. I still attach lines front
and rear to my bumper -- the tie downs in your cargo area are not strong
enough by any stretch of the imagination. Remember, it's not just weight,
but lift as well.
2 -- proper placement of the rack to the vehicle. You can attach your boats
as tightly as possible to your rack, and if the rack flies off, so do the
boats. Do it right, test it often.
3 -- handling. Your vanagon (or other vehicle) now has a sail on top, quite
literally, and you are even more exposed to the dangers of cross winds.
Drive cautiously.
4 -- loading/unloading of boats. Take your time, and get some help if
possible. Not only will you bang up your van, you'll bang up a sensitive
boat. I've developed systems over the years to unload even our tandem off
the top by myself, but I've also busted my ass plenty of times, and my boats
have the scars to show it.
5 -- drive up windows/ATM machines. Forget it. Know your total height, and
remember it. You are not going to fit where you used to, and not knowing
the vertical clearance is a recipe for disaster.
Having said that, you are about to embark on some very enjoyable boating.
Sea/touring kayaks are an utter blast, when handled correctly. Learn the
boat before you get into the surf, it's heavy, and has a mind of it's own.
Fishing out of a kayak is particularly more enjoyable than in a canoe, as
you will have a very low profile, and blow around considerably less. But do
watch out for boats, they are not watching out for you. And wear your PFD
no matter how warm the weather. You will tip over, and it will save your
life, if not your gear.
Have fun.
TJK
--
Todd J. Kaderabek, Director of Production
Lark Books, Fiberarts Magazine, Folkwear Patterns
50 College Street
Asheville, NC 28801
Phone: (828) 253-0467, X 331
Fax: (828) 253-7952
todd@larkbooks.com
|