Howdy, I'm in the process of replacing the clutch in my '85 crew cab this week. My Bentley is still at the old house someplace (still haven't moved everything yet), so I was hoping somebody could look up the following torque specs and post them to the list. Bolts, flywheel to crankshaft. (my guess is 85ft/lbs) Bolts, pressure plate to flywheel (my guess is 22ft/lbs) Bolts, CV-Joint to drive flange (my guess is 31ft/lbs) As usual, I'll be posting a how-to with photos on my website (a partially done version is already up). Thanks, TomC tcarrington@relitech.com http://www.relitech.com/tomc http://volksweb.relitech.com 85 Vanagon Crew Cab 82 Westy diesel=>gas conversion 65 Notchback |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.