At 10:02 AM 4/1/00 -0800, you wrote: >I have searched the archives and their seams to be >conflicting information after removing the rear heater >core. Should you connect the lines together or plug >them both? Plugging is hardly gorgeous, if you don't want incorrect mixing hot to cold to detriment the front core, just get new non straight nylon or brass (make sure the nylon is hot water rated) couplers and replace the T's, looks factory no ugly coolant hose hanging around. John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.