May guess is you messed up the hall sensor. The thing in the bottom of the distributor. Check and make sure the plug is in. Be careful. The plastic breaks ease. Eric 86-VW4x4 vw4x4@fyi.net 72-240z Pittsburgh, PA USA 1936-Chrysler
On Thu, 6 Apr 2000, Dan Fleming wrote: > Okay lists, I just changed the cap and rotor on my syncro and now there > is no spark. I tried a second and third set of caps and rotors and still > no spark. > > What could have happened? > > Please copy me directly on any responses. > > Thanks > > Dan Fleming > > ------------------------------------------------------------------------ > LOW RATE, NO WAIT! > Get a NextCard Visa, in 30 seconds! Get rates > as low as 2.9% Intro or 9.9% Fixed APR and no hidden fees. > Apply NOW! > http://click.egroups.com/1/2122/2/_/527143/_/955070192/ > ------------------------------------------------------------------------ > > If you would like to unsubscribe, visit > Syncro-unsubscribe@onelist.com > > > > > > > > > > > > > > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.