|
Good Afternoon, On my 1987 Westfalia Syncro, there's a bit of crud which periodically blocks the drives's side windshield washer nozzle. I'd like to remove the nozzle and blow it out with compressed air to rid it of this wandering menace. Has anybody on the list found a good way to remove the nozzles without breaking them? The driver's side nozzle also hits the wiper arm during a major portion of the wiper stroke. Has anyone replaced their stock windshield washer nozzles with a different nozzle with a better spray pattern?? I must confess, I don't always have time to read every digest I receive, so please respond to me directly as well as to the list. Best regards to all, Jon |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.