Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2000, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 4 Apr 2000 23:05:19 -0700
Reply-To:     bpchristensen1@HOME.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Brent Christensen <bpchristensen1@HOME.COM>
Subject:      Re: Need advice inner cylinder sealing ring
Comments: To: harald_nancy <harald_nancy@EARTHLINK.NET>
Content-Type: text/plain; charset="iso-8859-1"

What was the answer?

Brent Christensen '89 GL Syncro Westy Santa Barbara, CA

----- Original Message ----- From: harald_nancy <harald_nancy@EARTHLINK.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, April 04, 2000 8:54 PM Subject: Re: Need advice inner cylinder sealing ring

> My question has been answered thanks to > Bob Donalds from Boston Engine. > Harald > '90 westy > ---------- > > From: harald_nancy <harald_nancy@earthlink.net> > > To: vanagon@GERRY.VANAGON.COM > > Subject: Need advice inner cylinder sealing ring > > Date: Tuesday, April 04, 2000 6:09 PM > > > > Hi all, > > Have my engine taken apart at a local shop to have > > new cylinder heads and piston kit installed. > > Today when I looked at it, I noticed that the mechanic > > must have slipped with the piston pin reamer, and > > a small chip is missing exactly in the corner where > > the lower rubber sealing ring for the cylinder liner goes. > > I am kind of upset about this, especially since the case > > is in such good condition. > > The mechanic and shop foreman tell me that it's no > > big deal, and they will use 570 locktite (?) sealant to fill it > > the chip. > > The rubber sealing ring alone would not seal the chip, > > it's probably too deep. > > Maybe some of you can think of another alternative. > > I'm not a big fan of gooey sealants bridging gaps. > > I'm sure it would hold up long enough for the warranty to be over. > > Any opinions are welcome. > > Harald > > '90 westy


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.