Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2000, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 4 Apr 2000 12:03:39 -0700
Reply-To:     BRENT CHRISTENSEN <bchristensen@INFOGENESIS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BRENT CHRISTENSEN <bchristensen@INFOGENESIS.COM>
Subject:      Re: Windshield Nozzles
Comments: To: "Jon B. Kanas" <kanas@QUALITY.QADAS.COM>
Content-Type: multipart/alternative;

Jon:

The little steel "nozzles" that are part of the plastic assembly can be removed by putting a pin into them and "popping" them out by tilting the pin (be careful - I have nearly lost mine this way - I use a towel over it so it doesn't go flying away). They are a little trickier to get back in, but it is fairly easy.

If you are talking about removing the entire black plastic assembly, this is (from what I understand) a much trickier operation. They are held in place by barbed hooks, so that they can be easily inserted but not removed. Per L. told me last week that the only way to get them out without getting in under the dash is to simply break them off and then fish the hose out. This sounds like a dangerous proposition (Per agreed), so I would think long and hard about how badly you want to remove the plastic mounts. If you do, I would suggest going at it from under the dash.

That being said, Per also mentioned that the nozzle assembly from a plain old Bug fits and has a better spray pattern.

As to your wiper clearance problem, it sounds like someone mounted the wrong wiper arm assembly. Try changing it to the correct unit for the Vanagon and see if that doesn't solve the problem. These are available from several list vendors. VW part number 251 955 409 (prolly around $25 each)

Brent Christensen '89 GL Syncro Westy Santa Barbara, CA

> -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of Jon B. Kanas > Sent: Tuesday, April 04, 2000 11:50 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Windshield Nozzles > > > Good Afternoon, > > On my 1987 Westfalia Syncro, there's a bit of crud which periodically > blocks the drives's side windshield washer nozzle. I'd like > to remove the > nozzle and blow it out with compressed air to rid it of this wandering > menace. Has anybody on the list found a good way to remove > the nozzles > without breaking them? > > The driver's side nozzle also hits the wiper arm during a > major portion of > the wiper stroke. Has anyone replaced their stock windshield washer > nozzles with a different nozzle with a better spray pattern?? > > I must confess, I don't always have time to read every digest > I receive, > so please respond to me directly as well as to the list. > > Best regards to all, > Jon >


[text/html]


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.