Oops! forgot to copy the list... ---------- From: Jeff Taberski <jeff@taberski.com> Date: Sat, 08 Apr 2000 15:08:03 -0500 To: Gina <GG811@SENTRYMICRO.COM> Subject: Re: No stalling @ idle/low rpms on 4/8/00 14:59, Gina at GG811@SENTRYMICRO.COM wrote: **snip** > Check the angled connecting boot (appx 3'' diameter) between the AFM and > throttle body. It's easy > enough to get off - attaches with 2 clips. Take it off, flex it and > inspect it thoroughly for cracks of any kind, big or small. If you find > any, seal them up (i used silicone) and allow it to cure thoroughly ^^^^^^^^^^^^^^^^ I was always told to NEVER use silicon on the air handling side of an engine with an O2 sensor. I understand it poisons the sensor. Am I wrong? -Jeff |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.