Date:         Mon, 10 Apr 2000 21:35:31 EDT
Reply-To:     EUROMOG@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Wessels <EUROMOG@AOL.COM>
Subject:      Re: Smog checks, how do you dyno smog a Syncro?
Content-Type: text/plain; charset="US-ASCII"

In a message dated 4/10/00 6:01:06 PM Pacific Daylight Time,
jeff@TABERSKI.COM writes:

<< f so, do they
 put all 4 wheels on the rollers and have the same resistance front to back?
>>

All wheel drive vehicles are exempt from the chassis dyno test. You still
have to go the smog check II or enhanced station, however. They just do the
idle and 2500rpm test with the newer analyzer.

John Wessels
European Motorsport
Livermore, CA
http://www.euromog.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.