Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 12 Apr 2000 13:10:32 -0700
Reply-To:     BRENT CHRISTENSEN <bchristensen@INFOGENESIS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BRENT CHRISTENSEN <bchristensen@INFOGENESIS.COM>
Subject:      Re: Waterboxer longevity and oil analysis
Comments: To: Stuart MacMillan <stuart@COBALTGROUP.COM>
Content-Type: multipart/alternative;

I have been doing this with every oil change for a year now, in order to start creating some bench marking. I use Blackstone Labs http://blackstone-labs.com/

If anyone else out there is using their service (or another) and wants to compare results, it may be interesting. (Heck, I may even publish it on a web site!). I began testing my engine at about 30,000 miles (it now has about 45,000 miles), so it should be showing a relatively "healthy" chemistry.

This could be a pretty interesting project...

Brent Christensen '89 GL Syncro Westy Santa Barbara, CA

> -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of Stuart MacMillan > Sent: Wednesday, April 12, 2000 8:50 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Waterboxer longevity and oil analysis > > > I forgot to mention another technique for checking your engine > condition, and that is having an oil analysis done. > http://herguth.com > sells a kit for $19.95 called their oil analysis kit. You collect a > sample of engine oil with at least 2000 miles of service and in a week > you get a complete report on its condition. Metals indicate bearing > wear, coolant and water are also measured. I did do this to > my used 2.1 > engine and it passed with flying colors. > > Well worth $19.95! Unfortunately, my '65 MGB came back with lots of > copper in the oil, evidence of a worn out bearing, even though my oil > pressure is excellent. Probably a cam bearing. > -- > Stuart MacMillan > Manager, Case Program > 800-909-8244 ext. 8208 > Fax: 206-269-6360 > > Getting your share of the Net yet? > http://cobaltgroup.com > http://UsedEquipNet.com >


[text/html]


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.