I just did this a few weeks ago with a Clarion. Radios these days work backwards. They want a constant hot lead and a ignition only hot lead. It used to be the constant hot was only for the memory. This new one i bought pulls all of it's current off of the constant hot (battery) and only uses the ignition hot to trip the relay to tell the radio it sould be on. So I added an additional rear-defrogger (hehe) switch to the dash and ran the ignition hot through it on it's way to the radio. This way I don't have to reach over to the radio to turn it off (little button) and more importantly, passers-by at night don't see the clock display and know that I have a new radio in there. Mikey `87 Westy, Eeore
Since my current radio is truly "off" when I turn it off, will my new radio drain my battery if I hook it up for constant power since, because of the clock, it is never really off? Scott Semyan '85 Westie Seattle |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.