At 09:37 AM 4/18/2000 -0500, you wrote: >Wiring your own is fairly easy. Each LED should get around 1.5 to 2.2v >(check on package) if you wire them in series (positive to negative) in a >daisy chain, all you need to do is to divide the voltage available by the >voltage of each LED to get the number of LEDs in each string. For most >LEDs, 7 would be the correct number (2v times 7= 14v) > >Chris Smith BUT, if one blows the whole chain goes! (BTDT) Austin |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.